How to reset the bios on an ASUS K52F laptop with Windows 10
Laptop ASUS K52F Windows 10. Previously, everything worked, but I happened to change some setting in the bios like EFI (enable) and after that everything did not work. When you turn on the computer, all Windows will load immediatelyF1 - F12 and del don't help.
I tried a bunch of options, there is no way to remove and close the contacts in the battery. Tried CMOS De-Animator did not help, tried to pull out the RAM and turn everything on exactly did not work tried Clear CMOS did not go to 10.
If you insert a flash drive with a new OS, the same bios does not react, just jumps and loads the Windows even if you press F2 or del very quickly.
Help who faced a similar problem for earlier thanks.
3 answers
You can reset BIOS using the DEBUG utility (included in the Windows OS, designed to quickly change the contents of the specified memory cells.). To do this, click ПУСК --> ВЫПОЛНИТЬ (or just a keyboard shortcut Win+R). Enter cmd in the line, then click OK. The interpreter command line should open Cmd.exe. In the command line, enter debug. Next, enter the commands:
Award BIOS:
-o 70 17
-o 71 17
-q
AMI BIOS:
-o 70 10
-o 71 0
-o 70 11
-o 71 0
-q
BIOS Phoenix:
-o 70 ff
-o 71 17
-q
In some boards, reset the BIOS password and load the factory settings occurs if you hold down the Ins, Ctrl+Alt+Del+Ins, X+~ key while switching on.
In the latest versions of Windows, you can access the BIOS settings via the system menu. It looks like this:
If not, then on ASUS laptops you can also get there by pressing F2 or ESC when you turn on. The button should be kept pressed at the time of pressing the power button and until you get to the BIOS.
Disconnect the hard drive https://www.youtube.com/watch?v=VQavHqx05Fo
- In Windows 10, press and hold the [Shift] key, and at the same time select [Restart] from the Start menu.
- Press and hold the [F2] key while turning on the laptop. possible options: [Del], [F10], [Esc]
- You have entered the BIOS settings.
Or so:
- Turn off the computer Start - > Shut down (do not sleep, do not close the lid, do not press the power key!)
- Press and hold the F2 button , then press the power button.
- Release the F2 button and you will see the BIOS settings.